|
 While waiting on the ignition to get here we decided to make sure everything worked well together.  So, we put on the tank, rear fender & seat pan. It looks good so far. As we get closer to completion we are getting more excited! Keep checking back here for updates. 
Add Comment  While waiting on the Pamco Ignition we tackled the strut-less rear fender. We made a cage for the inside of the fender that will hold the rear fender in place.  We also finished trimming the rear fender & shot it with some primer. Before we send the tins off to paint we want to make sure everything fits. So, we installed the taillight in the fender & will bolt the fender in the frame before we get it to paint. Keep checking back here for updates. 
| Dynamic BlogWe blog project progress, events & other fun stuff. Feel free to comment & check back for updates.
Dynamic CategoriesAll Dynamic ArchivesDecember 2012 Content copyright 2013 Dynamic Cycles. All rights reserved. |
RSS Feed
