Still trying to get everything on & working. Finishing up the polishing for the engine cases & covers.
Right & left engine case covers all polished up & on.
Still working on this one so keep checking back here for updates.
| Still trying to get everything on & working. Finishing up the polishing for the engine cases & covers. Right & left engine case covers all polished up & on. Still working on this one so keep checking back here for updates.
Add Comment  Now that it runs we are working on making it pretty. We polished the tappet covers, the crank vent, the cam chain adjuster cover & the dipstick. Still have a few more pieces to polish but they are coming out real nice. Keep checking back here for updates. 
Finally got this thing running. Still needs to be timed & tuned but it's a step in the right direction. Keep checking back here for updates.  Finished wrapping the 2 into 1 intake that we made. Now it will match the exhaust pipes.  Also, finished the Pamco install. Installed the intake, carb & filter. Next step is firing it up! Keep checking back here for updates.   Finally got the new Pamco Hi-output Ignition installed. Had to change some wiring around but got it in. Keep checking back here for updates. 
| Dynamic BlogWe blog project progress, events & other fun stuff. Feel free to comment & check back for updates.
Dynamic CategoriesAll Dynamic ArchivesDecember 2012 Content copyright 2013 Dynamic Cycles. All rights reserved. |
RSS Feed
