Finally got the gas tank sealed up & the hole for the new petcock tapped. So, we stripped the tank & primed it. Still needs some finish work before it is ready for paint.
Keep up with this & other projects right here.
| Finally got the gas tank sealed up & the hole for the new petcock tapped. So, we stripped the tank & primed it. Still needs some finish work before it is ready for paint. Keep up with this & other projects right here.
1 Comment  Had to shorten the kickstand for a second time to give it the proper lean angle. First time that it has sat on its own for a long time. Keep checking back here for updates on this & other projects. 
 Finished up the shift & rear brake linkage. Also, finished fabbing up the side mount plate. It is now complete with a white LED plate light. Keep checking back here for more updates. 
 Got the front & rear calipers on the XS with new pads & fluid. All bled & working great. Keep checking back here for updates. 
 Still trying to get everything on & working. Finishing up the polishing for the engine cases & covers.  Right & left engine case covers all polished up & on. Still working on this one so keep checking back here for updates. 
 Now that it runs we are working on making it pretty. We polished the tappet covers, the crank vent, the cam chain adjuster cover & the dipstick. Still have a few more pieces to polish but they are coming out real nice. Keep checking back here for updates. 
Finally got this thing running. Still needs to be timed & tuned but it's a step in the right direction. Keep checking back here for updates.  Finished wrapping the 2 into 1 intake that we made. Now it will match the exhaust pipes.  Also, finished the Pamco install. Installed the intake, carb & filter. Next step is firing it up! Keep checking back here for updates.   Finally got the new Pamco Hi-output Ignition installed. Had to change some wiring around but got it in. Keep checking back here for updates. 
 While waiting on the ignition to get here we decided to make sure everything worked well together.  So, we put on the tank, rear fender & seat pan. It looks good so far. As we get closer to completion we are getting more excited! Keep checking back here for updates. 
| Dynamic BlogWe blog project progress, events & other fun stuff. Feel free to comment & check back for updates.
  Dynamic CategoriesAll Dynamic ArchivesMay 2012 Content copyright 2011 Dynamic Cycles. All rights reserved. |
RSS Feed
